Glarks 125Pcs Marine Grade Heavy Duty Tinned Copper Wire Lugs Battery Cable Ends Eyelets SC Ring Terminal Connectors Assortment Kit
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Purchase options and add-ons
Connector Type | Ring |
Contact Material | Copper |
Terminal | Ring Terminal |
Material | Copper |
Brand | Glarks |
About this item
- ★『What You Get:』 In this set, we offer 8 types of SC cold end termination ring terminals total 125pcs for your work, they are sorted packed in a plastic box.
- ★『High Quality:』 All the SC ring terminals are made of 100% annealed electrolytic grade copper for maximum conductivity, with tinned surface for corrosion protection.
- ★『Reliable:』 Terminals with heavy duty construction improves high temperature durability and closed design seals out the moisture, ensure connection reliability; high standard flared opening for easy wire insertion.
- ★『UL Approved:』 These marine grade SC ring terminals are UL Approved, comply with all relevant European standards. Wire can be crimped or soldered to copper lugs, more safe.
- ★『Application:』 These battery cable lugs are safe and reliable, great for distribution box, marine, golf carts, solar panels, home applications, etc.
Frequently bought together
More items to explore
- iCrimp Battery Cable Lug Crimping Tool for 8, 6, 4, 2, 1, 1/0 AWG Heavy Duty Wire Lugs, Battery Terminal, Copper Lugs with Wire Shear CutterAmazon's Choicein CrimpersFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Mar 27
- iCrimp Cable Lug Crimping Tool for Heavy Duty Wire Lugs, Battery Terminal, Copper Lugs AWG 8-1/0FREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Mar 27
- TKDMR 10pcs 1/0 AWG-3/8" Battery Lugs,Heavy Duty Wire Lugs,Ring Terminal ,0 Guage terminals,Battery Cable Ends/Terminal Connectors with 10pcs 3:1 Heat Shrink TubingFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Mar 27
- Kimbluth 6 Gauge Duplex Marine Wire Tinned Copper Boat Cable, 20ft 6 AWG Standard USA OFC Oxygen Free Copper Wire for Automotive Boat Speakers Solar OutdoorsAmazon's Choicein Boat Electric WireFREE Shipping by AmazonGet it as soon as Wednesday, Mar 27
- TKDMR 160Pcs Copper Wire Lugs AWG2 4 6 8 10 12 with Heat Shrink Set, 80Pcs Battery Cable Ends Ring Terminals Connectors Tubing Assortment KitAmazon's Choicein Ring TerminalsFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Mar 27
- ROCKDIG 40PCS Gauge 8 6 4 Butt Terminal Electrical Wire Connectors Tinned Copper Crimp Splices Cable FerrulesFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Mar 27
Product details
- Is Discontinued By Manufacturer : No
- Package Dimensions : 7.83 x 5.28 x 1.5 inches; 1 Pounds
- Item model number : SCA B
- Date First Available : December 12, 2018
- Manufacturer : Glarks
- ASIN : B07LBQ4DTX
- Best Sellers Rank: #9 in Car Amplifier Power-Cable Terminals
- Customer Reviews:
Product Description
Glarks 125Pcs Marine Grade UL Approved Heavy Duty Tinned Copper Wire Lugs Battery Cable Ends Eyelets SC Ring Terminal Connectors Assortment Kit
Specification:
Meterial: Copper
Surface: Tin Plated
Type: 8 Type
Quantity: 125Pcs
Package Detail:
SC6-6 (AWG10-1/4) ----------- 25pcs
SC6-8 (AWG10-5/16) ---------- 20pcs
SC10-6 (AWG8-1/4) ----------- 20pcs
SC10-8 (AWG8-5/16) ---------- 20pcs
SC16-6 (AWG6-1/4) ----------- 10pcs
SC16-8 (AWG6-5/16) ---------- 10pcs
SC25-6 (AWG4-1/4) ----------- 10pcs
SC25-8 (AWG4-5/16) ---------- 10pcs
Total Quantity: 125Pcs
Choose Us:
☛ High quality copper meterial has good electrical conductivity.
☛ Heavy duty construction improves high temperature durability.
☛ Closed design seals out the moisture, ensure connection reliability.
☛ AWG wire size and stud size identification on the lug for easy to identify.
☛ UL Approved, comply with all relevant European standards.
Notice:
♥ Model SCA-B: "A" means the wire square(mm²) that this terminal can hold, "B" means the inner diameter of the ring for screw.
♥ Please check the specific size of the product according to the second picture.
♥ If you have any questions, please feel free to contact me, I will respond to you within 12 hours.
Looking for specific info?
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers like the value and performance of the electronic component terminal. They mention that it works perfectly for the job and achieves exceptional results. They are also satisfied with ease of use, selection, and service. That said, some complain about the thickness. Opinions are mixed on quality and size.
AI-generated from the text of customer reviews
Customers appreciate the value of the electronic component terminal. They say it is good quality for the money, easy to use, and has a lot of pieces for the price.
"THE GOOD.. Got a lot of pieces for the price.. Nice organized box....." Read more
"Good assortment. Great value for money especially when compared to the ripoff auto part stores. Terminals are acceptably sturdy...." Read more
"...instead of flanged, it is difficult to insert the wire, but they were cheap and what I needed at the time. Good enough." Read more
"...Otherwise they are nice lugs at a great value." Read more
Customers are satisfied with the performance of the electronic component terminal. They mention that it works well for low amperage applications and battery cables. Some say that it's not high quality but is usable and effective wire lugs.
"These worked well on my battery cables. I didn't have a crimper large enough, so I soldered them on with rosin flux, solder and a torch...." Read more
"...Used this to repair/replace battery cables for my truck. Does a great job!" Read more
"Replaced the safety cable on my Jeep tire cable. Worked great and looks professional." Read more
"...I used several of these with my hydralic crimper and achieved exceptional results." Read more
Customers find the electronic component terminal easy to use. They say it's easy to work out of, crimp, and install. They also say it makes jobs easier and makes for a clean looking install.
"Used to replace battery terminals and in a car audio install. Easy to crimp with a hammer crimping tool...." Read more
"If you're doing wiring on a vehicle this is a must have. Makes jobs easier. And makes for a clean looking install." Read more
"Sized incorrectly. Very thin, will not crimp with standard hydraulic crimper dies. I would not use these on any high current application...." Read more
"...They were very easy to install and are holding up well." Read more
Customers appreciate the good assortment and great selection of the electronic component terminal.
"Good assortment. Great value for money especially when compared to the ripoff auto part stores. Terminals are acceptably sturdy...." Read more
"Excellent variety and selection. Great for automotive work." Read more
"Very pleased with my purchase it has a great assortment" Read more
"Great set for the money. Variety is excellent and well made." Read more
Customers are satisfied with the service provided by the electronic component terminal. They mention that the eyelets are heavy duty and will solder well. They also appreciate the good quality connectors, which are easy to crimp and solid. Overall, customers are happy with their purchase and recommend it to others.
"...sure of the product long term,but eyelets are heavy duty and will solder well,it you don't trust crimped connections totally....I do both!;))" Read more
"The electric welding work perfect in the material, has no small hole but it's in the description. Now my sound car looks professional" Read more
"Purcjased to add battery cables for my ATV winch. Easy to crimp and solid." Read more
"Good quality connectors, case is a bit flimsy though. Overall, still effective" Read more
Customers have mixed opinions about the quality of the electronic component terminal. Some mention that the eyelets are heavy duty and will solder well. They also say that the terminals are acceptably sturdy and pretty foolproof. However, others say that they are not heavy duty by any stretch of the imagination, the metal is very thin and does not withstand any twisting or bending.
"...Terminals are acceptably sturdy. I was using with #6 stranded copper battery cable. I just put the wire in and crimped it with a hammer...." Read more
"...THE BAD..VERY thin gauge..Not heavy duty as stated..I will not use these on any heavy duty applications.. Euphemism "spy Hole" in title is another..." Read more
"...I can't be totally sure of the product long term,but eyelets are heavy duty and will solder well,it you don't trust crimped connections totally....I..." Read more
"...Had to buy a bigger crimper for them. Nice heavy metal construction." Read more
Customers are mixed about the size of the electronic component terminal. Some mention that they have a good variety of sizes with different hole sizes, and are great for grounding cables. However, others say that they are odd sizes and not suitable for their application.
"...that the lugs were winging/flaring which is an indication of wrong crimp size for wire. Tested on a lug without the wire and it still would wing...." Read more
"A good variety of sizes with different hole sizes, too. Had to buy a bigger crimper for them. Nice heavy metal construction." Read more
"...The 8 is too large but next size down was a bit too tight, hard to get all of the wires in. Although the case has dividers they came mixed up...." Read more
"...high-current battery systems for RVs, and these lugs are perfect for the medium-size wires I am using...." Read more
Customers are dissatisfied with the thickness of the electronic component terminal. They mention that the metal is very thin and does not withstand any twisting or bending. They also say that the walls are too thin to trust crimping and that the terminals aren't as thick as they were expecting.
"...THE BAD..VERY thin gauge..Not heavy duty as stated..I will not use these on any heavy duty applications.. Euphemism "spy Hole" in title is another..." Read more
"they were indeed plated copper but very thin, not remotely heavy duty and must be a copper blend as they are very hard as opposed to burndy or other..." Read more
"Walls are to thin to trust crimping and it has holes in bottom of cavity so melting solder will just run out." Read more
"The wall thickness is rather thin in my opinion" Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
THE BAD..VERY thin gauge..Not heavy duty as stated..I will not use these on any heavy duty applications.. Euphemism "spy Hole" in title is another way of saying open end....Stated in the description "closed design"..
Unfortunately for me I did not catch the double statement.. I now have to solder the hole closed..
I WILL.. Keep and use these.. BUT.. Only on light duty applications..
I was happy to find these as most battery cable lugs I found were almost as costly for a pair of lugs as for this whole kit.