Long before I install solar in my RV, I have to think about power use of my electronics, that is the amps and type of voltage (12V/110V). Computer use in a RV has become easier since laptops became available. Battery use is always an issue in a recreational vehicle and certainly with computers that may… Continue reading “Intel: Little Stick, Big Surprise.” How To Successfully Integrate A Computer In Your RV
Tag: 110V
110V Power Inlet
The van is internally a 12V system fed by solar panels, with some 110V outlets powered by an inverter. Only the battery charger needs access to an exterior power source. For this, a 15A power inlet is installed next to the rear door, on the passenger side of the van. ParkPower 150BBIWRV 15… Continue reading 110V Power Inlet
Wiring
While working on the multi-use cabinet, I started with some of the wiring. Before I can continue building new cabinets, the majority of the electrical wiring has to be installed. Battery Monitor The monitor will be located on the wall next to the side doors and connected to the batteries with 4 small… Continue reading Wiring
Power Generation
After upgrading to off-grid power and power storage, this post elaborates on the available power generating tools for a small RV. The electrical calculations are comprised into a detailed schematic overview, that serves as the basis for the installation. Alternator The extra power from the alternator can be directed to the battery bank, to… Continue reading Power Generation
Power storage
Now that the different parts of the electrical system have been established, the first thing to do is calculate the number of batteries needed to support the daily energy use. Here a lot of time goes into researching all appliances that will ultimately be installed. Adding up their amperage use, will yield our daily… Continue reading Power storage
Multi-Use Cabinet (8)
After my last post, I took a short brake, but now I’m refreshed and at it again. We are in the final stretch of the multi purpose cabinet and next time I hope to have it ready to install in the (cargo) van conversion. Meanwhile, to prevent any noise made by the cooktop cover while… Continue reading Multi-Use Cabinet (8)
Multi-Use Cabinet (6)
A lot of time is spent on this multi purpose cabinet in pursuit of a high standard of finish. When it is ready and installed in the next two weeks, I will continue with the cargo van conversion. There’s the solar prep and walls & floors to be finished. Previously I installed a Romex… Continue reading Multi-Use Cabinet (6)
Multi-Use Cabinet Drawings
Drawings for the multi purpose cabinet at the side doors of the van are based on a general theme, as reflected in the adjoining image. Many of the features will be incorporated in all of the remaining cabinets and closets. The color theme is a reddish cherry with dark gray decorations. Some of the doors… Continue reading Multi-Use Cabinet Drawings
110V Wiring (2)
Besides a 110V outlet at the rear doors, a second outlet is planned at the side door entry. I start with a regular Romex house wire in the inverter compartment under the bed. An inverter will be added in a later stage. Because the compartment is directly next to the wheel housing, I have to… Continue reading 110V Wiring (2)
110V Wiring
To continue work on the bed, the 110V outlets are next. A small and simple job. The only 110V will be available at 2 outlets, one at the side entry doors and the other at the rear doors. They will both be connected to an inverter. I started with a shallow outlet box at the… Continue reading 110V Wiring