Cabinet Unit
Assembly of the cabinet unit, which houses all the components of the fresh water tank.
In this Build Guide ‘base cabinet units’ are used as individual units, which contain most or all components dedicated to a specific function, such as water supply, kitchen plumbing, battery storage, fridge unit, etc.
With a simple construction method and ‘standard sizes’, they simplify any van build.
Cabinet Dimensions
- A minimum 16” deep base unit is sufficient for either of the recommended tanks, but depth of unit should be in relationship to other units next to it.
- A suggested height of either 23” or 35”, dependent on the design around it.
- Length 48” (total of three 16” base units).
- Use a back panel of at least 0.5 inch thickness.
This page may contain affiliate links that I am compensated for at no cost to you. Please check out my privacy policy for full details, and thank you for supporting the site!
BUILD GUIDE UPDATE
Be the first to receive an update, when a new Project is added to this Build Guide. I also include a monthly overview of newly posted videos.
Materials
Wood Glue
waterproof
interior/exterior
Cabinet Unit Assembly
Assembly of the cabinet unit, which houses all the components of the fresh water tank.
Assemble this fresh water cabinet unit, check how it fits in the van and apply a finish material to the exposed sides.
1. In the interior of the unit.
3. Place the cabinet.
materials
- 0.5” plywood
tools
- drill
QUESTIONS, SUBMISSIONS OR CORRECTIONS
The missing parts of the complete van conversion process are being added regularly to this Build Guide. If you want to suggest a specific build option for this guide, submit a content correction or have a general inquiry, send me an email.
Error: Contact form not found.
Disclaimer: Throughout this guide, all guidance, building techniques and other information are based on my own experiences of converting a cargo van into a Tiny House on wheels. This guide is only for informational purposes; always build according to local and national standards. Be aware that such a project is expensive, requires a substantial amount of broad knowledge of building techniques and involves more work hours than you can imagine. Besides of hitting a finger with a hammer, much more serious harm can be done when you work with 12V/120V electrical systems, propane installations, power tools, etc. Tapping into the vehicle’s own systems can also damage its functionality. Get professional help where needed; never take any risk!