The Multi-Use Cabinet needed some decorative strips finished with a round cherry ‘button’. This is how I made the perfect circle out of cherry.
Author: van
Multi-Use Cabinet Drawings
Drawings for the multi purpose cabinet at the side doors of the van are based on a general theme, as reflected in the adjoining image. Many of the features will be incorporated in all of the remaining cabinets and closets. The color theme is a reddish cherry with dark gray decorations. Some of the doors… Continue reading Multi-Use Cabinet Drawings
Decisions, decisions…
Having just finished the rear door cabinetry for the van conversion, I now have to decide which woodworking project to continue with. I would love to start with the kitchen and closet wall on the driver’s side, but feel that it is more practical to put some final designs on paper for a side door… Continue reading Decisions, decisions…
2012 Chevrolet Express
General motors (gm) is recalling certain model year 2012 chevrolet express and suburban vehicles, and gmc savana and yukon xl heavy duty vehicles. The steering gear pitman shaft may not have been adequately hardened and could fracture.
Cabinetry Installation
Previous posts in this series are Rear Door Cabinetry and Addtional Rear Door Cabinet. Both cabinets are installed by re-using the existing door panels. They are first removed from the doors to which they are attached with plastic plugs. With a red marker I indicate where I have to cut the metal door frame,… Continue reading Cabinetry Installation
Additional Rear Door Cabinet
Additional storage space is highly appreciated in my camper, even as small as this little door cabinet. A RV has never enough! As with the other door, I’ll have to find some Cherry and do the assembly in my workshop. I follow the same procedure as the main cabinet that I just finished. I… Continue reading Additional Rear Door Cabinet
Rear Door Cabinetry
Creating the rear door cabinets is the next step in my van conversion. They will add extra storage space, of which every little bit counts in a RV. It involves mostly simple woodworking, so I’ll be heading back to my workshop. First the driver’s side rear door. The red line in the photo indicates the… Continue reading Rear Door Cabinetry
Progress update
Just one picture this time as an appetizer. After finishing the pull-out shelf under the bed, I’ve been quite busy working on the rear doors. I already removed the fabric covered panels and decided to replace them with built-in cabinetry. There is only 3″-4″ depth available, but every little bit of storage counts in a… Continue reading Progress update
Pull-out shelf (final)
In my previous postings (Pull-out bed shelf and Pull-out shelf (2)) I built the shelf in my workshop; now I head out to the van, to make some final measurements, adjust it and finish the last details. Two issues remain: the front of the shelf needs to be shortened and finished with cherry and secondly… Continue reading Pull-out shelf (final)
Pull-out shelf (2)
In my previous post I glued the panel. Now I’ll continue with the cherry frame. The frame I start with a 2″ thick board that I cut down to the approximate size of the wood that is needed for the two side pieces. The lumber is set aside for a minimum of 24 hours. This… Continue reading Pull-out shelf (2)